独联体信息港博客圈
 域名:http://linhaihong.blog.globalimporter.net/
 
  ·中国***标准名称3-2

硬聚氯乙烯(PVC-U) 饮水管材和管件 铅、锡、镉、汞的萃取方法及允许值 Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drinking water supply--Extractability of lead, tin, cadmium and mercury occurring as impurities--Test method and pemitted levels 

硬聚氯乙烯(PVC-U)管材吸水性试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of water absorption 

硬聚氯乙烯(PVC-U)管材耐***性试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of resistance to acetone 

塑料管材耐外负荷试验方法 Test method for external loading resistance for plastic pipe 

石油裂化用无缝钢管 Seamless steel tubes for petroleum cracking 

给水用硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipe for water supply 

埋地排污、废水用硬聚氯乙烯(PVC-U)管材 Unplasticized poly vinyl chlorid (PVC-U) pipes for buried drainage and sewerage systems 

医用软聚氯乙烯管材 Plasticized polyvinyl chloride (PVC)tubing for medical uses 

活塞式单级制冷压缩机 Single-stage reciprocating refrigerant compressors 

空调用通风机安全要求 Safety requirements of fan for air conditioning 

通风机现场试验 Site testing of fams 

近海停泊排吸油橡胶软管的分类、规格和基本技术要求 Classification, dimension and basic requirements for rubber hose - Oil suction and discharge - Offshore mooring 

飞机地面加油和泄油用橡胶软管 Rubber hoses for aircraft ground fuelling and defuelling 

钢丝缠绕增强外覆橡胶的液压橡胶软管和软管组合件 Rubber hoses and hose assemblies - Rubber-covered,spiral wire reinforced, hydraulic type - Specification 

液化石油气 (LPG) 橡胶软管 Liquid petroleum gas rubber hose 

热塑性塑料管材通用壁厚表 Thermoplastics pipes-Universal wall thickness table 

氧气瓶阀 Valves for oxygen cylinders 

气瓶锥螺纹丝锥 Special taps of taper threads for gas cylinders 

溶解乙炔气瓶阀 Valves for dissolved acetylene cylinders 

三螺杆泵型式与基本参数 Types and basic parameters of three screw pumps 

三螺杆泵技术条件 Technical specifications of three screw pumps 

空气处理机组安全要求 Safety requirements for air handling units 

固定的空气压缩机 安全规则和操作规程 Stationary air compressors - Safety rules and code of practice 

压缩空气干燥器 规范与试验 Compressed air dryers - Specifications and testing 

离心式、混流式、轴流式水泵运行管理 Operational management of centrifugal, mixed flow and axial pumps 

黄铜焊接管 Welded brass tube 

真空镀膜设备通用技术条件 Vacuum coating plant generic specification 

往复泵 型号编制方法 The model designation of reciprocating pump 

溶解乙炔气瓶 Dissolved acetylene cylinders 

溶解乙炔气瓶多孔填料技术指标测定方法 Methods of test for porous mass of dissolved acetylene cylinders 

铝合金无缝气瓶 Seamless aluminium alloy gas cylinder 

重水罐 Heavy water tank 

电风扇电耗限定值及测试方法 The limited value of energy consumption of electric fans and it's measuring method 

气瓶定期检验站技术条件 Technological specifications for periodic inspection station of gas cylinders 

溶解乙炔气瓶用回火防止器 Arrester for dissolved acetylene cylinders 

气瓶气密性试验方法 Method for pneumatic testing of cylinders 

袋式除尘器性能测试方法 Measuring method for performance of bag filter 

通用阀门 标志 General purpose industrial valves - Marking 

法兰连接金属阀门 结构长度 Metal valves for use in flanged pipe systems - Face-to -face and centre-to-face dimensions 

多回转阀门驱动装置的连接 Multi-turn valve actuator attachment 

部分回转阀门驱动装置的连接 Part-turn valve actuator attachment 

钢制阀门 一般要求 General requirements for industrial steel valves 

通用阀门 铜合金铸件技术条件 General purpose industrial valves - Specification of copper alloy castings 

通用阀门 灰铸铁件技术条件 General purpose industrial valves - Specification of flake graphite iron castings 

通用阀门 球墨铸铁件技术条件 General purpose industrial valves - Specification of spheroidal graphite iron castings 

通用阀门 碳素钢锻件技术条件 General purpose industrial valves - Specification of carbon steel forgings 

通用阀门 碳素钢铸件技术条件 General purpose industrial valves - Specification of carbon steel castings 

通用阀门 奥氏体钢铸件技术条件 General purpose industrial valves - Specification of austenitic steel castings 

通用阀门 法兰连接铁制闸阀 General purpose industrial valves?Flanged iron gate valves 

通用阀门 铁制截止阀与升降式止回阀 General purpose industrial valves - Casting iron globe valves and lift check valves 

通用阀门 法兰和对焊连接钢制闸阀 General purpose industrial valves - Flanged and butt-weld steel gate valves 

通用阀门 法兰连接钢制截止阀和升降式止回阀 General purpose industrial valves - Flanged steel globe valves and lift check valves 

通用阀门 钢制旋启式止回阀 General purpose industrial valves - Steel swing check valves 

通用阀门 法兰和对焊连接钢制球阀 General purpose industrial valves--Flanged and butt-weld end steel ball valves 

通用阀门 法兰和对夹连接蝶阀 General purpose industrial valves - Flanged and wafer butterfly valves 

通用阀门 隔膜阀 General purpose industrial valves - Diaphragm valves 

通用阀门 铁制旋塞阀 General purpose industrial valves?Iron plug valves 

安全阀 一般要求 Safety valves - General requirements 

安全阀 性能试验方法 Performance test methods for safety valves 

弹簧直接载荷式安全阀 Spring loaded safety valves 

减压阀一般要求 General specification for pressure reducing valves 

减压阀 性能试验方法 Methods of performance test for pressure reducing valves 

先导式减压阀 Pilot-operated reducing valves 

蒸汽疏水阀 分类 Automatic steam traps - Classification 

蒸汽疏水阀 术语 Automatic steam traps - Definition of technical terms 

蒸汽疏水阀 标志 Automatic steam traps - Marking 

蒸汽疏水阀 结构长度 Automatic steam traps - Face-to-face dimensions 

蒸汽疏水阀 试验方法 Automatic steam traps - Test methods 

钢制球形储罐 Steel spherical tanks 

管法兰用垫片密封性能试验方法 Test method for sealing characteristics of gaskets for pipe flanges 

钢制对焊无缝管件 Steel butt-welding seamless pipe fittings 

管法兰垫片 应力松弛试验方法 Test method for stress relaxation of gaskets for pipe flanges 

管法兰垫片 压缩率及回弹率试验方法 Test method for compressibility and recorery of gaskets for pipe flanges 

橡胶软管 外胶层耐磨耗性能的测定 Rubber hoses - Determination of abrasion resistance of the outer cover 

橡胶和塑料软管组合件 屈挠液压脉冲试验(半Ω试验) Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (Half omega test) 

机械结构用不锈钢焊接钢管 Welded stainless steel tubes for machine structure 

流体输送用不锈钢焊接钢管 Welded stainless steel pipes for liquid delivery 

排水用柔性接口铸铁管及管件 Cast iron pipes and fittings with flexible joint sewerage 

潜水电泵试验方法 Test methods for submersible motor - Pumps 

溶解乙炔气瓶气压试验方法 Method for pneumatic test of dissolved acetylene cylinders 

钢质无缝气瓶定期检验与评定 Periodic inspection and evaluation of seamless steel gas cylinders 

气瓶术语 Terminology of gas cylinders 

离心泵、混流泵和轴流泵 汽蚀余量 NPSH for centrifugal, mixed flow and axial pumps 

离心泵效率 Efficiencies for centrifugal pumps 

混流泵、轴流泵技术条件 Technical specifications for mixed and axial flow pumps 

聚乙烯(PE)管材 外径和壁厚极限偏差 Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses 

聚丙烯(PP)管材 外径和壁厚极限偏差 Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses 

硬聚氯乙烯(PVC-U) 管材 - 外径和壁厚极限偏差 Unplasticized polyvinyl chloride (PVC-U) pipes - Tolerances on outside diameters and wall thicknesses 

钢质焊接气瓶定期检验与评定 Periodic inspection and evaluation of welded steel gas cylinders 

溶解乙炔气瓶定期检验与评定 Periodic inspection and evaluation of dissolved acety lene cylinders 

铝合金无缝气瓶定期检验与评定 Periodic inspection and evaluation of seamless aluminium alloy gas cylinders 

石油和液体石油产品 立式圆筒形金属油罐容积标定法 (围尺法) Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Strapping method 

石油和液体石油产品 立式圆筒形金属油罐容积标定法 (光学参比线法) Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Optical reference line method 

一般用途轴流通风机技术条件 Technical specification for general purposes axiae fans 

一般用途离心通风机技术条件 Technical specification for general purposes centrifugal fans 

容积式空气压缩机进气滤清*** Intake filter silencers for displacement air compressors 

一般用压缩空气质量等级 Compressed air for general use - Quality classes 

一般用干螺杆空气压缩机技术条件 Dry screw air compressor for general use - Specifications 

一般用固定式往复活塞空气压缩机技术条件 Stationary reciprocating piston air compressor for general use - Specifications 

工艺流程用螺杆压缩机技术条件 Screw compressor for the process industry - Specifications 

球墨铸铁管件 Ductile iron pipe fittings 

离心铸造球墨铸铁管 Centrifugal casting ductile iron pipe 

锅炉、热交换器用不锈钢无缝钢管 Seamless stainless steel tubes for boiler and heat exchanger 

混凝土泵 Concrete pump 

往复泵机械振动测试方法 Measurement of mechanical vibration for reciprocating pump 

钢板制对焊管件 Steel plate butt-welding pipe fittings 

大直径碳钢管法兰 Large-diameter carbon steel pipe flanges 

大直径碳钢管法兰用垫片 Gaskets for large-diameter cabon steel pipe flanges 

管法兰用聚四氟乙烯包复垫片 Polytetrafluoroethylene envelope gaskets for pipe flanges 

氩气瓶阀 Valves for argon cylinders 

***瓶阀 Valves for liquid chlorine cylinders 

无缝气瓶压扁试验方法 Method for flattening test of seamless gas cylinders 

硬聚氯乙烯(PVC-U) 管材 ***浸渍试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes - Dichloromethane test 

软聚氯乙烯管 (流体输送用) Plasticized polyvinyl chloride tubing for transport of fluids 

软聚氯乙烯管 (电线绝缘用) Plasticized polyvinyl chloride tubing for elect rical insulation 

低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材 Thin wall unplasticized polyvinyl chloride (PVC-U) pipes for low-pressure conveyance in irrigation 

直缝电焊钢管 Longitudinal electric resistance welded steel tubes 

通用阀门 压力试验 Pressure testing for general purpose valves 

微型往复活塞空气压缩机 Reciprocating piston micro air compressor 

水环真空泵和水环压缩机试验方法 Methods of testing for water-ring vacuum pumps and compressors 

水环真空泵和水环压缩机气量测定方法 Methods for the measurement of volume flow of gas of water-ring vacuum pump and compressor 

电除尘器 性能测试方法 Methods of performance tests for electrostatic precipitators 

通用阀门铁制旋启式止回阀 General purpose industrial valves--Cast iron swing check valves 

小型贯流式通风机 Miniature cross-flow fan 

风力机设计通用要求 Design general requirements for wind energy conversion system 

24°非扩口液压管接头连接尺寸 Hydraulic fluid power--Connection for tubes and hoses--Dimensions and designs for 24°flareless fittings 

液压缸活塞杆端带关节轴承耳环安装尺寸 Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions 

气缸气口螺纹 Pneumatic fluid power--Cylinders--Bore and port thread sizes 

液压系统工作介质固体颗粒污染等级代号 Hydraulic fluid power--Fluids--Method for coding level of contamination by solid particles 

液压滤芯结构完整性检验方法 Hydraulic fluid power--Filter elements--Verification of fabrication integrity 

液压滤芯材料与液体相容性检验方法 Hydraulic fluid power--Filter elements--Verification of material compatibility with fluids 

液压滤芯抗破裂性检验方法 Hydraulic fluid power--Filter elements--Verification of collapse/burst resistance 

液压滤芯额定轴向载荷检验方法 Hydraulic fluid power--Filter elements--Method for end load test 

液压缸活塞杆端柱销式耳环安装尺寸 Hydraulic fluid power--Cylinders--Rod end plain eyes--Mounting dimensions 

喷油泵试验台 试验方法 Method for testing fuel injection pump test-stand 

热塑性塑料管材耐外冲击性能试验方法 时针旋转法 Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method 

液化气体气瓶充装规定 Rules for filling of liquefied gas cylinders 

***气体气瓶充装规定 Rules for filling of permanent gas cylinders 

矿用流体输送电焊钢管 Welded steel pipe for mine liquid service 

组合式空调机组 Central-station air handling units 

空气过滤器 Air filter 

空气冷却器与空气加热器 Air cooling and air heating coils 

管道用三通过滤器 Tee strainers for fluids for pipes 

锻钢制承插焊管件 Forged steel socket welding pipe fittings 

大中型水轮机进水阀门基本技术条件 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine 

气动元件流量特性的测定 Pneumatic fluid power--Determination of flow rate characteristics of pneumatic components 

气动管接头试验方法 Pneumatic fluid power--Tube fittings--Test methods 

气动快换接头试验方法 Pneumatic fluid power--Quick action couplings--Test methods 

波纹金属软管通用技术条件 General specification for corrugated metallic hose assemblies 

正拱形金属***片型式与参数 Specification and type for conventional domed metallic bursting discs 

反拱形金属***片型式与参数 Specification and type for reverse domed metallic bursting discs 

锻钢制螺纹管件 Forged steel threaded pipe fittings 

蒸汽往复泵 Steam reciprocating pump 

家用和类似用途的交流换气扇及其调速器  *域名隐藏* ic ventilating fans and regulators for household and similar purposes 

钢丝增强的橡胶、塑料软管和软管组合件 屈挠液压脉冲试验 Rubber and plastics hose and hose assemblies--Wire reinforced--Hydraulic impulse test with flexing 

橡胶和塑料软管各层间粘合强度测定 Rubber and plastics hose--Determination of adhesion between components 

结构用不锈钢无缝钢管 Stainless steel seamless tubes for structures 

流体输送用不锈钢无缝钢管 Stainless steel seamless pipes for fluid transport 

球形金属罐容积标定法(围尺法) Capacity calibration of spherical metal tanks--Strapping method 

铁制和铜制球阀 Cast iron and copper alloy ball valves 

湿式除尘器性能测定方法 Measuring method for performance of wet dust collectors 

阀门的结构长度 对焊连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Buttwelding valves 

阀门的结构长度 对夹连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Wafer valves 

阀门的结构长度 内螺纹连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Female screw valves 

阀门的结构长度 外螺纹连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves--Mals screw valves 

液压缸活塞和活塞杆动密封装置用同轴密封件尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of co-axial seals--Dimensions and tolerances 

液压缸活塞和活塞杆动密封装置用支承环尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances 

液压缸活塞和活塞杆动密封装置用同轴密封件安装沟槽尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of Co-axial seals--Dimensions and tolerances of housings 

液压缸活塞和活塞杆动密封装置用支承环安装沟槽尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances of housings 

织物增强液压橡胶软管和软管组合件 Rubber hoses and hose assemblies-Textile-reinforced hydraulic type 

预应力混凝土输水管检验方法 Inspection methods of prestressed concrete pipes for water 

小容积液化石油气钢瓶 Liquefied petroleum gas steel mini-cylinders 

气瓶阀通用技术条件 General technique specifications for cylinder valves 

气瓶阀出气口连接型式和尺寸 Outlet connections and sizes for cylinder valves 

气瓶型号命名方法 Designation for gas cylinders 

气瓶水压***试验方法 Method for hydraulic burst test of gas cylinders 

反击式水轮机空蚀评定 Cavitation pitting evaluation in reaction hydraulic turbines 

管法兰用金属包覆垫片 Metallic envelope gaskets for pipe flanges 

液压缸试验方法 Hydraulic fluid power--Cylinders-test method 

房间空气调节器用全封闭型电动机--压缩机 Hermetic motor--compressors for room air conditioners 

灌溉支管用聚乙烯(PE)25管材 由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 Test method and specifications of susceptibility for environmental stress-cracking induced by insert type fittings in low density polyethylene (PE)25 pipes for irrigation laterals 

聚乙烯压力管材与管件连接的耐拉拔试验 Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings 

橡胶、塑料软管 燃烧试验方法 Rubber and plastics hoses--Method of test for flammability 

织物增强液压型热塑性塑料软管和软管组合件 Plastics hose and hose assemblies--Thermoplastics, textile-reinforced, hydraulic type 

手工打结地毯绒头长度的试验方法 Hand-knotted carpet--Determination of length of pile 

瓶装压缩气体分类 Classificetion of cylinder compressed gases 

小容积溶解乙炔气瓶 Small volume dissolved acetylene cylinders 

***片装置夹持器型式和外形尺寸 Bursting disc devices--Type and outline dimensions holders 

板式换热器 Plate heat exchanger 

便携式用丁烷气瓶 Butane cylinders for portable butane cooker 

软管快速接头 Quick hose' s connection 

真空技术 管路配件 装配尺寸 Vacuum technology--Pipeline fittings--Mounting dimensions 

压力容器波形膨胀节 Bellows expansion joints for pressure vessel 

混凝土和钢筋混凝土排水管试验方法 Test methods of concrete and reinforced concrete drainage and sewer pipes 

自增压式液氮容器 Autoboosting calibre liquid nitrogen container 

低温容器漏气速率测定方法 Test methods for leak rate of cryogenic containers 

排水用芯层发泡硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems 

气瓶警示标签 Precautionary labels for gas cylinders 

液体石油管道压力试验 Pressure testing of liquid petroleum pipelines 

离心泵技术条件(I类) Technical specifications for centrifugal pumps--Class I 

气瓶用***片技术条件 Bursting discs specification for gas cylinders 

流程工业用透平压缩机 设计、制造规范与数据表 Compressors for the process industry--Turbo types--Specifications and data sheets for their design and construction 

钢制法兰管件 Steel pipe fittings for flanged joint 

钢制管法兰连接强度计算方法 Calculating method for the strength of steel pipe flanged joint 

工业过程控制阀 第1部分: 控制阀术语和总则 Industrial--Process control valves Part 1: Control valve terminology and general considerations 

工业过程控制阀 第5部分: 标志 Industrial-process control valves Part 5: Marking 

工业过程控制阀 第7部分: 控制阀数据单 Industrial-process control valves Part 7: Control valve data sheet 

工业过程控制阀 第8部分: 噪声的考虑 第1节: 实验室内测量空气动力流流径控制阀产生的噪声 Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves 

铸铁管法兰 类型 Synotic table for cast iron pipe flanges 

铸铁管法兰盖 Cast iron pipe blank flanges 

带颈螺纹铸铁管法兰 Hubbed threaded cast iron pipe flanges 

带颈平焊和带颈承插焊铸铁管法兰 Hubbed slip-on-welding and hubbed socket welding cast iron pipe flanges 

管端翻边带颈松套铸铁管法兰 Loose hubbed cast iron pipe flanges for lapped pipe end 

整体铸铁管法兰 Integral cast iron pipe flanges 

铸铁管法兰 技术条件 Specifications for cast iron pipe flanges 

汽车用压缩天然气钢瓶 Steel cylinders for the on--board of compressed natural gas as a fuel for vehicles 

机动车用液化石油气钢瓶 Steel cylinders for the liquefied petroleum gas 

钢制球形储罐型式与基本参数 Spherical tanks type and data base 

工业用非重复充装焊接钢瓶 Non-refillable steel welded cylinder for industry cylinder 

在用喷油泵试验台的校验 Calibrating rule of using fuel injection pump test-bench 

流体传动系统及元件 术语 Fluid power systems and components--Vocabulary 

球墨铸铁管 外表面喷锌涂层 Ductile iron pipes--External zinc-spray coating 

球墨铸铁管 水泥砂浆离心法衬层 一般要求 Ductile iron pipes--Centrifugal cement mortar lining--General requirements 

球墨铸铁管 水泥砂浆离心法衬层 新拌砂浆的成份检验 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar 

球墨铸铁管 沥青涂层 Ductile iron pipes--Bitumen coating 

液压泵空气传声噪声级测定规范 Test code for the determination of airborne noise level of hydraulic pumps 

液压油液取样容器 净化方法的鉴定和控制 Hydraulic fluid power--Fluid sample containers--Qualifying and controlling cleaning methods 

液压泵、马达和整体传动装置参数定义和字母符号 Hydraulic fluid power--Pumps,motors and integral transmissions--Parameter definitions and letter symbols 

液压过滤器 压降流量特性的评定 Hydraulic fluid power--Filter--Evaluation of pressure drop versus flow characteristics 

四油口和五油口液压伺服阀 安装面 Hydraulic fluid power--Four-and five-port servovalves--Mounting suriaces 

液压滤芯 流动疲劳特性的验证 Hydraulic fluid power--Filter elements--Verification of flow fatigue characteristics 

液压颗粒污染分析 从工作系统管路中提取液样 Hydraulic fluid power--Particulate contamination analysis--Extraction of fluid samples from lines of an operating system 

液压控制阀 油口、底板、控制装置和电磁铁的标识 Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids 

液压泵、马达和整体传动装置稳态性能的测定 Hydraulic fluid power--Positive displacement pumps,motors and integral transmissions--Determination of steady-state performance 

橡胶 管道接口用密封圈制造质量的建议 疵点分类与类别 Rubber--Recommendations for the workmanship of pipe joint rings--Description and classification of imperfections 

液化丙烯、丙烷钢质焊接气瓶 Welded steel cylinders for liquefied propylene and propane gases 

单元式空气调节机 Unitary air conditioners 

工业通风机 尺寸 Industrial fans--Dimensions 

房间空气调节器安装规范 Installation rule for room air-conditioner 

空调与制冷用无缝铜管 Specification for seamless copper tube for air conditioning and refrigeration field service 

液氨瓶阀 Valves for liquid ammonia cylinders 

工业用非重复充装瓶阀 Non-refillable cylinder valve for industry 

气瓶对接焊缝 X射线实时成像检测 Standard practice for X-ray real-time examination of cylinders weld 

车用压缩天然气瓶阀 Valves for compression natural gas cylinders for vehicles 

核级高效空气过滤器 Nuclear grade high efficiency particulate air filter 

热塑性塑料管材蠕变比率的试验方法 Thermoplastics pipes--Determination of creep ratio 

离心泵、混流泵和轴流泵 水力性能试验规范 精密级 Centrifugal,mixed flow and axial pumps--Code for hydraulic performance tests--Precision class 

金属压力容器声发射检测及结果评价方法 Acoustic emission examination and evaluation of metallic pressure vessels 

真空技术 质谱检漏仪校准 Vacuum technology--Mass-spectrometer-type leak-detector calibration 

机动车用液化石油气钢瓶集成阀 Automotive LPG steel cylinder multivalve 

自动控制钠离子交换器技术条件 Specification for automatic sodium ion exchange Water treatment equipment 

橡胶和塑料软管及软管组合件 透气性的测定 Rubber and plastics hoses and hose assemblies--Determination of permeability to gas 

橡胶和塑料软管及非增强软管 液体壁透性测定 Rubber and plastics hoses and tubing--Determination of transmission of liquids through hose and tubing walls 

橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定 Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour and appearance 

蒸汽橡胶软管试验方法 Rubber hoses for steam--Test methods 

液压软管组合件 液压系统外部泄漏分级 Hydraulic hose assemblies--External leakage Classification for hydraulic systems 

全封闭涡旋式制冷压缩机 Hermetic scroll refrigerant compressors 

蒸气压缩循环冷水(热泵)机组 工商业用和类似用途的冷水(热泵)机组 Water chilling (heat pump) packages using the vapor compression cycle Water chilling (heat pump) packages for industrial and commercial and similar application 

蒸气压缩循环冷水(热泵)机组 户用和类似用途的冷水(热泵)机组 Water chilling (Heat pump) Packages using the vapor compression cycle Household and similar water-chilling (Heat pump) packages 

蒸汽和热水型溴化锂吸收式冷水机组 Steam and hot water type lithium bromide absorption water chiller 

低温绝热压力容器 Cryo-insulation pressure vessels 

低温绝热压力容器试验方法 容积测量 Testing method of cryo-insulation pressure vessels volume measurement 

低温绝热压力容器试验方法 真空度测量 Testing method of cryo-insulation pressure vessels vacuum measurement 

低温绝热压力容器试验方法 漏率测量 Testing method of cryo-insulation pressure vessels leakage measurement 

低温绝热压力容器试验方法 漏放气速率测量 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement 

低温绝热压力容器试验方法 静态蒸发率测量 Testing method of cryo-insulation pressure vessels static vaporation rate measurement 

交联聚乙烯(PE-X)管材与管件 交联度的试验方法 Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinking by determination of the gel content 

热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall Service(design) coefficient 

流体输送用聚烯烃管材 耐裂纹扩展的测定切口管材裂纹慢速增长的试验方法(切口试验) Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test) 

中心孔 Center holes 

机床工作台 T形槽和相应螺栓 Machine tool table--T-slots and corresponding bolts 

焊缝符号表示法 Welds-symbolic representation on drawings 

螺母丝锥 Nut taps 

丝锥螺纹公差 Manufacturing tolerances on the threaded portion of taps 

丝锥技术条件 Technical specification for taps 

圆板牙 型式和尺寸 The types and dimensions for circular scr***g dies 

圆板牙 技术条件 Technical specifications for circular scr***g dies 

圆板牙架型式和互换尺寸 Die stocks--Interchangeability dimensions 

滚丝轮 Thread rolling cylindrical dies 

搓丝板 Thread rolling flat dies 

不锈钢焊条 Stainless steel covered electrodes 

堆焊焊条 Hardfacing electrodes for shielded metal arc welding 

气焊、手工电弧焊及气体保护焊焊缝坡口的基本形式与尺寸 Basic forms and sizes of weld grooves for gas welding manual arc welding and gas-Shielded arc welding 

埋弧焊焊缝坡口的基本形式和尺寸 Basic forms and sizes of weld grooves for submerged arc welding 

电渣重熔炉的试验方法 Test methods for electro-slag remelting furnaces 

短莫氏锥柄立铣刀 End mills with short Morse taper shank 

键槽铣刀 第1部分: 直柄键槽铣刀 型式和尺寸 Slot drills- Part 1: Milling cutters with parallel shanks-Dimensions 

键槽铣刀 第2部分: 莫氏锥柄键槽铣刀 型式和尺寸 Slot drills--Part 2: Milling cutters with Morse taper shanks-Dimensions 

键槽铣刀 第3部分: 技术条件 Slot drills--Part 3: Technical specifications 

套式立铣刀 第1部分: 型式与尺寸 Shell end mills--Part 1: Dimensions 

套式立铣刀 第2部分: 技术条件 Shell end mills--Part 2: Tachnical specifications 

圆柱形铣刀 Cylindrical cutters 

直齿三面刃铣刀 Side and face milling cutter with straight teeth 

错齿三面刃铣刀 Side and face milling cutters with double alternate helix 

尖齿槽铣刀 Flat relieved tooth slotting cutters 

凸凹半圆铣刀 第1部分: 凹半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters 

凸凹半圆铣刀 第2部分: 凸半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters 

凸凹半圆铣刀 技术条件 Convex and concave milling cutters technical specifications 

半圆键槽铣刀 Cutters for woodruff keyseats 

手用铰刀 Hand reamers 

直柄机用铰刀 Machine reamers with parallel shanks 

锥柄机用铰刀 Machine reamers with Morse taper shanks 

带刃倾角锥柄机用铰刀 Machine reamers with edge inclination Morse taper shanks 

套式机用铰刀 Shell machine reamers 

直柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with parallel shanks 

锥柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with Morse taper shanks 

锥柄扩孔钻 Core drills with Morse taper shanks 

套式扩孔钻 Shell drills 

60°、90°、120°锥柄锥面锪钻 Countersinks with morse taper shanks for angles 60°,90°and 120°inclusive 

锥柄麻花钻 第1部分: 莫氏锥柄麻花钻的型式和尺寸 Taper shank twist drills--Part 1: The types and dimensions for Morse taper shank twist drills 

锥柄麻花钻 第2部分: 莫氏锥柄长麻花钻的型式和尺寸 Taper shank twist drills--Part 2: The types and dimensions for long Morse taper shank drills 

锥柄麻花钻 第3部分: 莫氏锥柄加长麻花钻的型式和尺寸 Taper shank twist drills--Part 3: The types and dimensions for lengthened morse taper shank twist drills 

锥柄麻花钻 第4部分: 莫氏锥柄超长麻花钻的型式和尺寸 Taper shank twist drills--Part 4: The types and dimensions for extra-long Morse taper shank twist drills 

直柄工具用传动扁尾及套筒的尺寸和公差 Driving tenons and sockets for parallel shank tools-- Dimensions and tolerances 

机床和工具柄用自夹圆锥 Machine tools--Self-holding tapers for tool shanks 

卧式车床 参数 General purpose parallel lathes--Parameters 

镀锡钢板(带)镀锡量试验方法 Tin coated sheet(strip)--Tin coating mass testing method 

钢铁产品镀锌层质量试验方法 Steel product--Zinc coating mass testing method 

铬镍奥氏体不锈钢焊缝铁素体含量测量方法 Determination of the weldign seam iron element contentin chromium,nickel austenitic stainless steel 

切削加工用硬切削材料的用途 切屑形式大组和用途小组的分类代号 Application of hard cutting materials for machining by chip removal--Designation of the main groups of chip removal and groups of application 

切削***用可转位刀片型号表示规则 Indexale inserts for cutting tools--Designation 

硬质合金可转位刀片圆角半径 Indexable hardmetal (carbide) inserts--Corner radii 

带圆孔的硬质合金可转位刀片 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole 

无孔的硬质合金可转位刀片 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole--Dimensions 

沉孔硬质合金可转位刀片 Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole--Part 1: Dimensions of inserts with 7°normal clearance 

硬质合金可转位铣刀片 Indexable hardmetal (carbide)inserts with wiper edges, without fixing hole--Dimensions 

普通磨料 代号 Symbols of abrasive materials 

普通磨料 棕刚玉 Conventional abrasive--Brown fused alumina 

普通磨料 碳化硅 Conventional abrasive Wilicon carbide 

固结磨具用磨料 粒度组成的检测和标记 第1部分: 粗磨粒 F4~F220 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220 

固结磨具用磨料 粒度组成的检测和标记 第2部分: 微粉F230~F1200 Bonded abrasives--Determination and designation of grain size distribution--Part 2: Microgrits F230 to F1200 

磨料标志和包装规定 Marking and packing 

普通磨具 代号和标记 Symbols and designation for bonded abrasive products 

普通磨具 砂轮 技术条件 Bonded abrasive products Grinding wheel Technical specifications 

普通磨具 磨头 技术条件 Bonded abrasive products Mounted wheel Technical specifications 

普通磨具 磨石 技术条件 Bonded abrasive products Sticks Technical specifications 

普通磨具 砂瓦 技术条件 Bonded abrasive products Grinding segments Technical specifications 

薄片砂轮 Thin grinding wheels 

砂轮静平衡检验方法及不平衡数值 Static balance testing for grinding wheels and unbalance value 

砂轮的回转试验方法 Rotation test of grinding wheel strength 

磨具安全规则 Safety rules for bonded abrasives 

普通磨具 包装 Packing for bonded abrasive products 

机械分度头 精度检验 Mechanical dividing heads Testing of accuracy 

机械分度头 分类和技术条件 Mechanical dividing heads Classifations and Technical specifcations 

DDZ-Ⅱ系列电动单元组合仪表工作信号 DDZ-ⅡSeries process electronic control system operating signal 

DDZ-Ⅲ系列电动单元组合仪表工作信号 DDZ-ⅢSeries process electronic control system operating signal 

过程检测和控制流程图用图形符号和文字代号 Prccess detection and control flow chart--Symbols and letter codes 

焊接接头机械性能试验取样方法 Methods of sampling for mechanical properties tests of welded joint 

焊接接头冲击试验方法 Method of impact test for welded joint 

焊接接头拉伸试验方法 Method of tensile test for welded joint 

焊缝及熔敷金属拉伸试验方法 Method of tensile tests for weld and deposited metal 

焊接接头弯曲及压扁试验方法 Methods of bend and compression tests for welded joint 

焊接接头及堆焊金属硬度试验方法 Methods of hardness tests for welded joint and surfacing metal 

焊接接头应变时效敏感性试验方法 Method of strain-age sensibillity test for welded joint 

焊缝金属和焊接接头的疲劳试验法 Weld beads metal and welds--Fatigue tests 

组合夹具元件结构要素 Modular parts of fixture construction--General features, profiles and dimensions 

台式钻床参数 Bench drilling machines - Parameters 

立式钻床参数 Vertical drilling machines - Parameters 

钻床主轴端部 Drilling machines?Spindle noses 

冲模滑动导向模架 对角导柱模架 Sliding guide die sets for press tools?Diagonal pillar sets 

冲模滑动导向模架 后侧导柱模架 Sliding guide die sets for press tools - Back pillar sets 

冲模滑动导向模架 后侧导柱窄形模架 Sliding guide die sets for press tools - Back pillar sets (narrow) 

冲模滑动导向模架 中间导柱模架 Sliding guide die seta for press tools - Center pillar sets 

冲模滑动导向模架 中间导柱圆形模架 Sliding guide die sets for press tools - Center pillar sets (round) 

冲模滑动导向模架 四导柱模架 Sliding guide die sets for press tools - Four pillar die sets 

冲模滚动导向模架 对角导柱模架 Ball slide die sets for press tools - Diagonal pillar sets 

冲模滚动导向模架 中间导柱模架 Ball slide die sets for press tools - Center pillar sets 

冲模滚动导向模架 四导柱模架 Ball slide die sets for press tools - Four pillar die sets 

冲模滚动导向模架 后侧导柱模架 Ball slide die sets for press tools?Back pillar die sets 

冲模滑动导向模座 对角导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for diagonal pillar sets 

冲模滑动导向模座 对角导柱下模座 Holder for sliding guide die sets for press tools - Die holder for diagonal pillar sets 

冲模滑动导向模座 后侧导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for back pillar sets 

冲模滑动导向模座 后侧导柱下模座 Holder for ball slide die sets for press tools - Die holder for back pillar sets 

冲模滑动导向模座 后侧导柱窄形上模座 Holder for sliding guide die sets for press tools - Punch holder for back pillar sets (narrow) 

冲模滑动导向模座 后侧导柱窄形下模座 Holder for sliding guide die sets for press tools - Die holder for back pillar sets (narrow) 

冲模滑动导向模座 中间导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for center pillar sets 

冲模滑动导向模座 中间导柱下模座 Holder for ball slide die sets for press tools - Die holder for center pillar sets 

冲模滑动导向模座 中间导柱圆形上模座 Holder for sliding guide die sets for press tools - Punch holder for center pollar sets (round) 

冲模滑动导向模座 中间导柱圆形下模座 Holder for sliding guide die sets for press tools - Die holder for center pillar sets (round) 

冲模滑动导向模座 四导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for four pillar sets 

冲模滑动导向模座 四导柱下模座 Holder for ball slide die sets for press tools?Die holder for four pillar sets 

冲模滚动导向模座 对角导柱上模座 Holder for ball slide die sets for press tools - Punch holder for diagonal pillar sets 

冲模滚动导向模座 对角导柱下模座 Holder for ball slide die sets for press tools - Die holder for diagonal pillar sets 

冲模滚动导向模座 中间导柱上模座 Holder for ball silde die sets for press tools - Punch holder for center pillar sets 

冲模滚动导向模座 中间导柱下模座 Holder for ball slide die sets for press tools - Die holder for center pillar sets 

冲模滚动导向模座 四导柱上模座 Holder for ball slide die sets for press tools - Punch holder for four pillar sets 

冲模滚动导向模座 四导柱下模座 Holder for ball slide die sets for press tools - Die holder for four pillar sets 

冲模滚动导向模座 后侧导柱上模座 Holder for ball silde die sets for press tools - Punch holder for back pillar sets 

冲模滚动导向模座 后侧导柱下模座 Holder for ball slide die sets for press tools - Die holder for back pillar sets 

冲模导向装置 A型导柱 Guide unit for press tools - Guide pillars, types A 

冲模导向装置 B型导柱 Guide unit for press tools - Guide pillars, type B 

冲模导向装置 C型导柱 Guide unit for press tools - Guide pillars, type C 

冷冲模导向装置 A型小导柱 Guide unit of cold press dies--Small guide 

冷冲模导向装置 B型小导柱 Guide unit of cold press dies--Small guide pillars, type B 

冲模导向装置 A型导套 Guide unit for press tools - Guide bushes, type A 

冲模导向装置 B型导套 Guide unit for press tools - Guide bushes, type B 

冲模导向装置 C型导套 Guide unit for press tools - Guide bushes, type C 

冷冲模导向装置 小导套 Guide unit of cold press dies--Small guide bushing 

冲模导向装置 钢球保持圈 Guide unit for press tools - Cage 

冲模导向装置 圆柱螺旋压缩弹簧 Guide unit for press tools - Cylindrical coil compression spring 

冲模导向装置 A型可卸导柱 Guide unit for press tools - Guide pillar with taper lead, type A 

冲模导向装置 B型可卸导柱 Guide unit fir press tools - Guide pillar with taper lead, type B 

冲模导向装置 衬套 Guide unit for press tools - Bushing 

冲模导向装置 垫圈 Guide unit for press tools?Washer 

冲模导向装置 压板 Guide unit for press tools - Clampr 

冷冲模导向装置 可卸导柱模座安装尺寸 Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars 

冷冲模导向装置 压圈固定导柱 Guide unit of cold press dies--Guide pillars with ring fixed 

冷冲模导向装置 压圈固定导套 Guide unit of cold press dies--Guide bushing with ring fixed 

冷冲模导向装置 压圈 Guide unit of cold press dies--Clamping ring 

镀锌钢丝锌层硫酸铜试验方法 Zinc-coated steel wire - Test method for uniformity of zinc coating on wire by the copper sulphate dip 

镀锌钢丝锌层重量试验方法 Zinc-coated steel wire - Test method for weight of zinc coating 

棕刚玉化学分析方法 Abrasive grains and crude--Chemical analysis of brown fused aluminium oxide 

白刚玉、铬刚玉 化学分析方法 Chemical analysis methods for white fused alumina and pink fused alumina 

碳化硅 化学分析方法 Chemical analysis methods for silicon carbide 

锡铅钎料 Tin-lead solder 

金属镀覆和化学处理与有关过程术语 Terminology for metallic coating chemical treatment and related process 

金属切削机床 操作指示形象化符号 Symbols for indications appearing on machine tools 

数字控制机床 操作指示形象化符号 Numerical control of machines--Symbols 

螺栓螺母用装配工具 机动套筒工具的传动四方 Assembly tools for screws and nuts-Driving squares for power socket tools 

螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸 Assembly tools for screws and nuts-Machine-operated square drive sockets (impact)--Dimensions 

螺栓螺钉用装配工具 机动螺刀头的六角传动端 Assembly tools for bolts and screws--Hexagon drive ends for machine-operated screwdriver bits 

钢熔化焊对接接头射线照相和质量分级 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel 

工业自动化仪表用模拟直流电流信号 Analogue direct current signals for industrial process measurement and control instruments 

工业自动化仪表用模拟直流电压信号 Analogue direct voltage signals for industrial process measurement and control instruments 

焊接术语 Welding terminology 

手动套筒扳手套筒 Hand operated square drive socket 

手动套筒扳手传动方榫和方孔 Driving square for hand operated socket wrenches 

手动套筒扳手传动附件 Drivings parts for hand operated square drive socket wrenches 

手动套筒扳手连接附件 Conjoining parts for hand operated square drive socket wrenches 

手动套筒扳手检验规则、包装与标志 Inspection, packaging and marking for hand operated socket wrenches 

焊接用钢盘条 Wire rods for electrode 

机用和手用丝锥 Machine and hand taps 

长柄机用丝锥 Long shank machine taps 

短柄机用和手用丝锥 Short shank machine and hand taps 

螺旋槽丝锥 Machine taps with helical flutes 

组合机床通用部件 多轴箱箱体和输入轴尺寸 Modular units for machine tool construction--Multi-spindle heads--Casing and input drive shaft dimensions 

组合机床通用部件 支架尺寸 Modular units for machine tool construction--Support brackets--Dimensions 

组合机床通用部件 回转工作台和回转工作台用多边形中间底座尺寸 Modular units for machine tool construction--Rotary tables and multi-sided centre bases for rotary tables--Dimensions 

组合机床通用部件 滑台尺寸 Modular units for machine tool construction--Slide units--Dimensions 

组合机床通用部件 动力箱尺寸 Modular units for machine tool construction--Headstocks--Dimensions 

组合机床通用部件 滑台侧底座尺寸 Modular units for machine tool construction--Wing bases for slide units--Dimensions 

组合机床通用部件 中间底座和立柱尺寸 Modular units for machine tool construction--Centre bases and columns--Dimensions 

组合机床通用部件 立柱侧底座尺寸 Modular units for machine tool construction--Wing base for columns--Dimensions 

组合机床通用部件 主轴部件尺寸 Modular units for machine tool construction--Spindle units--Dimensions 

组合机床通用部件 多轴箱主轴端部和可调接杆尺寸 Modular units for machine tool construction--Spindle noses and adjustable adaptors for multi-spindle heads --Dimensions 

组合机床通用部件 有导轨立柱尺寸 Modular units for machine tool construction--Integral way columns--Dimensions 

组合机床通用部件 落地式有导轨立柱尺寸 Modular units for machine tool construction--Floor-mounted type--Integral way columns--Dimensions 

组合机床通用部件 安装多轴箱用的法兰盘和端面传动键尺寸 Modular units for machine tool construction--Tenon drive and flanges for mounting multi-spindle heads--Dimensions 

铝及铝合金焊条 Aluminum and aluminum-alloy electrodes for shielded metal arc welding 

铜及铜合金焊条 Coated electrodes for copper and copper alloys 

涂料焊条效率、金属回收率和熔敷系数的测定 Covered electrodes--Determination of the efficiency, metal recovery and deposition coefficient 

手持式电动工具的管理、使用、检查和维修安全技术规程 Technical safety code for management, operation, inspection maintenance of hand-held motor operated tools 

拉刀矩形柄 型式和基本尺寸 Rectangular shanks for broaches--Types and main dimensions 

拉刀圆柱形前柄型式和基本尺寸 Round shanks for broaches--Types and main dimensions 

拉刀圆柱形后柄型式和基本尺寸 Round follower end for broaches--Types and main dimensions 

7:24手动换刀刀柄圆锥 7/24 tapers for tool shanks for manual changing 

手持式电动工具的安全 ***部分: 通用要求 Safety of hand-held motor-operated electric tools Part 1: General requirements 

手持式电动工具的安全 第二部分: 螺丝刀和冲击扳手的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 

手持式电动工具的安全 第二部分: 电动砂轮机、抛光机和盘式砂光机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requiements for electric grinders, polishers and disk-type sanders 

手持式电动工具的安全 第二部分: 砂光机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sanders 

手持式电动工具的安全 第二部分: 圆锯和圆刀的专用要求 Safety of hand-held motor-operated tools Part 2: Particular requirments for circular saws and circular knives 

手持式电动工具的安全 第二部分: 电钻的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular reqiements for electric drills 

手持式电动工具的安全 第二部分: 电锤的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric hammers 

手持式电动工具的安全 第二部分: 电剪刀的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sheet matal shears 

手持式电动工具的安全 第二部分: 电动攻丝机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric tappers 

手持式电动工具的安全 第二部分: 电刨的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particlar requirements for electric planers 

手持式电动工具的安全 第二部分: 电动往复锯 (曲线锯、刀锯) 的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric reciprocating saws (jig and sabre saws) 

手持式电动工具的安全 第二部分: 混凝土振动器 (插入式振动器) 的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for concrete vibrators (internal vibrators) 

手持式电动工具的安全 第二部分: 不易燃液体电喷枪的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for spray guns for non-flammable liquids 

手持式电动工具的安全 第二部分: 电链锯的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for chain saws 

手持式电动工具的安全 第二部分: 电动修枝剪与电动草剪的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for hedge trimmers and grass shears 

手持式电动工具的安全 第二部分: 电动钉钉机的专用要求 Safety of hand-held motor operated electric tools--Part 2: Particular requirements for tackers 

手持式电动工具的安全 第二部分: 电动木铣与电动修边机的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for routers and immers 

工作台不升降铣床精度 Milling machines with table of fixed height with horizontal or vertical spindle--Testing of the accuracy 

升降台铣床精度 Milling machines with table of variable height with horizontal or vertical spindle--Testing of the accuracy 

熔敷金属中扩散氢测定方法 Methods for determination of diffusible hydrogen in deposited metal 

摇臂钻床 精度检验 Radial drilling machines--Testing of the accuracy 

圆柱立式钻床 精度检验 第1部分: 几何精度检验 Pillar type vertical drilling machines--Testing of the accuracy--Part 1: Testing of the geometric accuracy 

圆柱立式钻床 精度检验 第2部分: 工作精度检验 Pillar type vertical drilling machines--Testing of the accuracy--Part 2: Testing of the working accuracy 

方柱立式钻床 精度检验 第1部分: 几何精度检验 Box type vertical drilling machines--Testing of the accuracy--Part 1: Geometrical tests 

方柱立式钻床 精度检验 第2部分: 工作精度检验 Bot type vertical drilling machines--Testing of the accuracy--Part 2: Working tests 

卧式车床精度检验 Acceptance conditions for general purpose parallel lathes--Testing of the accuracy 

卧轴矩台平面磨床 精度 Surface grinding machines with horizontal grinding wheel spindle and reciprocating table--Testing of the accuracy 

普通磨具 形状和尺寸 Shapes and dimensions for bonded abrasive products 

塑料注射模具零件 推杆 Components of injection mould for plastics--Ejector pins 

塑料注射模具零件 直导套 Components of injection mould for plastics--Straight guide bushes 

塑料注射模具零件 带头导套 Components of injection mould for plastics--Guide bushes with head 

塑料注射模具零件 带头导柱 Components of injection mould for plastics--Guide pillars with head 

塑料注射模具零件 有肩导柱 Components of injection mould for plastics -- Guide pillars with shoulder 

塑料注射模具零件 垫块 Components of injection mould for plastics -- Spacer blocks 

塑料注射模具零件 推板 Components of injection mould for plastics--Ejector plates 

塑料注射模具零件 模板 Components of injection mould for plastics--Mould plates 

塑料注射模具零件 限位钉 Components of injection mould for plastics--Stop pins 

塑料注射模具零件 支承柱 Components of injection mould for plastics--Support pillars 

塑料注射模具零件 圆锥定位件 Components of injection mould for plastics--Locating elements 

塑料注射模具零件技术条件 Components of injection mould for plastics--Specifica-tion 

高速钢车刀条 High speed steel tool bits 

锥柄长刃机用铰刀 Long fluted machine reamers with Morse taper shanks 

带刃倾角直柄机用铰刀 Machine reamers with edge inclination with parallel shanks 

机用铰刀技术条件 Machine reamers--Technical requirements 

铰刀专用公差 Special tolerance for reamers 

锥柄机用桥梁铰刀 Machine bridge reamers with Morse taper shanks 

手用1:50锥度销子铰刀技术条件 Hand taper 1:50 reamers--Technical requirements 

圆锥铰刀技术条件 Taper reamers--Technical requirements 

硬质合金直柄机用铰刀 Machine reamers with parallel shanks with carbide tips 

硬质合金锥柄机用铰刀 Machine reamers with Morse taper shanks with carbide tips 

硬质合金铰刀技术条件 Reamers with carbide tips--Technical requirements 

套式铰刀和套式扩孔钻用心轴 Arbors for shell reamers and shell core drills 

直柄扩孔钻 Core drills with parallel shanks 

扩孔钻技术条件 Core drills--Technical requirements 

60°、90°、120°直柄锥面锪钻 Countersinks with parallel shanks for angles 60°90°and 120°inclusive 

锥面锪钻技术条件 Countersinks--technical requirements 

带导柱直柄平底锪钻 Counterbores with parallel shanks and solid pilots 

带可换导柱锥柄平底锪钻 Counterbores with morse taper shanks and detachable pilots 

平底锪钻技术条件 Counterbores--technical requirements 

带导柱直柄90°锥面锪钻 90°Countersinks with parallel shanks and solid pilots 

带可换导柱锥柄90°锥面锪钻 90°Countersinks with morse taper shanks and detachable pilots 

90°锥面锪钻技术条件 90°Countersinks--technical requirements 

锪钻用可换导柱 Detachable pilots for use with counterbores and countersinks 

直柄回转工具用柄部直径和传动方头尺寸 Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares 

三爪自定心卡盘 基本参数和尺寸 3-jaw self-centering chucks--Dimensions 

呆扳手、梅花扳手、两用扳手的型式 Types of open-end wrenches, box wrenches and combination wrenches 

螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的***尺寸 Assembly tool for screws and nuts-Openend double-head engineers wrenches, doublehead box wrenches and combination wrenches-Maximum outside dimensions of heads 

公制扳手开口和扳手孔的常用公差 Spanner gaps and sockets-Metric series-tolerances for general use 

双头扳手的对边尺寸组配 Combinations of double-end wrenche gaps 

敲击呆扳手和敲击梅花扳手 Slugging open-end wrenches and slugging box wrenches 

呆扳手 - 梅花扳手、两用扳手 技术规范 Open-end wrenches, box wrenches and combination wrenches-Technical specifications 

工业自动化仪表工作条件 振动 Industrial process measurement and control instrument operating conditions--Vibration 

活扳手 Adjustable wrenches 

电动工具噪声测量方法 工程法 Measurement of noise emitted by electric tools-Engineering method 

螺钉和螺母的装配工具术语 Assembly tools for screws and nuts-nomenclature 

焊接性试验 斜Y型坡口焊接裂纹试验方法 Weldability testing--Method of Y-groove cracking test 

焊接性试验 搭接接头(CTS) 焊接裂纹试验方法 Weldability testing--Method of controlled thermal severity cracking test 

焊接性试验 T型接头焊接裂纹试验方法 Weldability testing--Method of cracking test for welded tee joint 

焊接性试验 压板对接(FISCO) 焊接裂纹试验方法 Weldability testing--Method of FISCO cracking test 

焊接性试验 焊接热影响区***硬度试验方法 Weldability testing--Testing method of maximum hard ness in weld heat-affected zone 

普通磨料取样方法 Method for sampling of conventional abrasive grains 

压铸模零件 模块 Die-cast die components--Mold plates 

压铸模零件 圆形镶块 Die-cast die components--Round insert blocks 

压铸模零件 矩形镶块 Die-cast die components--Rectangular insert blocks 

压铸模零件 A型导柱 Die-cast die components--Guide pins type A 

压铸模零件 B型导柱 Die-cast die components--Guide pins type B 

压铸模零件 A型导套 Die-cast die components--Guide bushings type A 

压铸模零件 B型导套 Die-cast die components--Guide bushings type B 

压铸模零件 推板 Die-cast die components--Ejector plates 

压铸模零件 推板导柱 Die-cast die components--Guide pins for ejector plate 

压铸模零件 推板导套 Die-cast die components--Guide bushings for ejector plate 

压铸模零件 推杆 Die-cast die components--Ejector pins 

压铸模零件 复位杆 Die-cast die components--Return pins 

压铸模零件 推板垫圈 Die-cast die components--Ejector plate washers 

压铸模零件 限位钉 Die-cast die components--Stop pins 

压铸模零件 垫块 Die-cast die components--Spacer blocks 

压铸模零件技术条件 Specification of the die-cast die components 

卧式内拉床 精度检验 Horizontal internal broaching machines--Testing of the accuracy 

无心磨床 精度 External cylindrical centerless grinding machines--Testing of the accuracy 

内圆磨床 精度 Internal cylindrical grinding machines with horizontal spindles--Testing of the accuracy 

转塔车床精度 Turret lathes--Testing of the accuracy 

外圆磨床 参数 External cylindrical grinding machines--Parameters 

外圆磨床 精度 External cylindrical grinding machines--Accuracy 

插齿机精度 Gear shaping machines--Testing of the accuracy 

测量、控制和试验室用电气设备的安全要求 第1部分: 通用要求 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements 

工业自动化仪表气源压力范围和质量 Pressure range and quality of air supply for the industrial process measurement and control instruments 

金属覆盖层 覆盖层厚度测量 阳极溶解库仑法 Metallic coatings--Measurement of coating thickness--Coulometric method by anodic dissolution 

磁性金属基体上非磁性覆盖层厚度测量 磁性方法 Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method 

非磁性金属基体上非导电覆盖层厚度测量 涡流方法 Non-conductive coatings on non-magnetic metal substrates--Measurement of coating thickness--Eddy current method 

压力机的安全装置技术要求 Technical requirememts for safety devices of the presses 

压力机用感应式安全装置技术条件 Technical requirements for induction type safety device used for the presses 

压力机用手持电磁吸盘技术条件 Technical requirements for hand-held electromagnetic disk used for the presses 

渐开线花键拉刀技术条件 Broaches for involute spline technical specifications 

渐开线花键滚刀通用技术条件 The general technical specifications for involute splines hobs 

30°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines 

45°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines 

焊接和切割用软管接头 Hose connection for equipment for welding and cutting 

碳钢焊条 Carbon steel covered electrodes 

低合金钢焊条 Low alloy steel covered electrodes 

金属焊接及钎焊方法在图样上的表示代号 Welding, brazing, braze welding and soldering of metals--List of processes for symbolic representation on drawings 

螺纹紧固件电镀层 Electroplated coatings on threaded fasteners 

车床刀架装刀槽高度 Machine tools--Lathe tool posts--Overall internal height 

金属基体上的金属覆盖层 (电沉积层和化学沉积层) 附着强度试验方法 Metallic coatings on metallic substrates--Electrodepo-sited and chemically deposited coatings--Review of methods available for testing adhesion 

龙门导轨磨床精度 Slideways grinding machines with two columns--Testing of the accuracy 

卧式铣镗床检验条件 精度检验 第2部分: 台式机床 Test conditions for boring and milling machines with horizontal spindle--Testing of the accuracy Part 2: Table--type machines 

电火花成形机 参数 第1部分: 单立柱机床(十字工作台型和固定工作台型) Die sinking electro-discharge machines(EDM)--Parameters Part 1: Single column machines(cross slide table type and fixed table type) 

电火花成形机 精度检验 第1部分: 单立柱机床(十字工作台型和固定工作台型) Die sinking electro-discharge machines(EDM)--Testing of accuracy Part 1: Single column machines (cross slide table type and fixed table type) 

埋弧焊用碳钢焊丝和焊剂 Carbon steel electrodes and fluxs for submerged arc welding 

手工具包装、标志、运输与贮存 Packaging,marking,transportation and storage of hand tools 

Ni-B-Si系自熔合金粉 Metallic powder material--Self-fluxing Ni-B-Si alloy powder 

Ni-Cr-B-Si系自熔合金粉 Metallic powder material--Self-fluxing Ni-Cr-B-Si alloy powder 

可转位立铣刀 Endmilling cutters with indexable inserts 

可转位三面刃铣刀 Side and facemilling cutters with indexable inserts 

可转位面铣刀 Facemilling cutters with indexable inserts 

可转位车刀及刀夹型号表示规则 Turning toolholders and cartridges for indexable inserts--Designation 

可转位车刀型式尺寸和技术条件 Turning tools with indexable inserts--Types,dimensions and technical specifications 

内六角扳手 Hexagon socket screw keys 

内六角花形扳手 Hexagon spline wrenches 

内六角花形螺钉旋具 Hexagon spline screwdrivers 

电钻 Electric drills 

铸造术语 Foundry terminology 

防锈材料百叶箱试验方法 Shed storage exposure test--Testing method for rust-proof material 

凿岩机械与气动工具 性能试验方法 Test methods of performance for rock drilling machines and pneumatic tools 

数据处理用的模块化仪器系统 CAMAC 系统 A modular instrumentation system for data handling--CAMAC system 

CAMAC 术语的定义 Definitions of CAMAC terms 

CAMAC 多机箱系统结构分支信息公路和A1型CAMAC 机箱控制器规范 CAMAC organization of multi-crate systems specification of the branch-highway and CAMAC crate controller type A1 

CAMAC 系统中的块传送 Block transfers in CAMAC systems 

摩擦材料洛氏硬度试验方法 Test method of Rockwell hardness for friction materials 

锉刀通用技术条件 General technical condition of files 

锉刀试验方法 Test methods of files 

锉刀检验规则、标志与包装 Test regulations, marking and packaging of files 

锉刀分类、编号规则 Classification and numbering regulations of files 

机床 主轴端部与花盘 互换性尺寸 第1部分: A型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 1: Type A 

机床 主轴端部与花盘 互换性尺寸 第2部分: 凸轮锁紧型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2: Camlock type 

机床 主轴端部与花盘 互换性尺寸 第3部分: 卡口型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3: Bayonet type 

四爪单动卡盘 型式、基本参数和尺寸 Types, basic parameters and dimensions of four-jaw independent chucks 

四爪单动卡盘 精度 Testing of accuracy of four-jaw independent chucks 

四爪单动卡盘 技术条件 Technical specifications of four-jaw independent chucks 

工业闭式齿轮油 Gear oils for industrial enclosed gear drives 

电热设备的安全 ***部分 通用要求 Safety in electroheat installations--Part 1: General requirements 

电热设备的安全 第二部分 对电弧炉设备的特殊要求 Safety in electroheat installations-part 2 Particular requirements for arc furnace installations 

电热设备的安全 第三部分 对感应和导电加热设备以及感应熔炼设备的特殊要求 Safety in electroheat installations--Part 3: Particular requirements for induction and conduction heating installations and induction melting installations 

电热设备的安全 第四部分: 对电阻炉的通用要求 Safety in electroheat installations--Part 4: General requirements for resistance furnaces 

电热设备的安全 第五部分 等离子设备的安全规程 Safety in electroheat installations - Part 5: Specifications for safety in plasma installations 

电热设备的安全 第六部分 对工业微波加热设备的特殊要求 Safety in electroheat installations--Part 6: Particular requirements for industrial microwave heating installations 

电热设备的安全 第七部分 对具有电子枪的电热设备的特殊要求 Safety in electroheat installations--part 7: Particular requirements for installations with electron guns 

电热设备的安全 第八部分 对电渣重熔炉的特殊要求 Safety in electroheat installations--part 8: Particular requirements for electro-slag remelting furnaces 

电热设备的安全 第九部分 对高频介质加热设备的特殊要求 Safety in electroheat installations?Part 9: Particular requirements for high-frequency dielectric heating installations 

电热设备的安全 第11部分: 对液态金属电磁搅拌、输送或浇注设备的特殊要求 Safety in electroheat installations-Part 11: Particular requirements for installations for electromagnetic stirring,transport or pouring of metal liquids 

表面粗糙度比较样块 铸造表面 Roughness comparison specimens--Cast surfaces 

剪切机械安全规程 Safety regulations for shearing machinery 

中心钻 第1部分: 不带护锥的中心钻-A型 型式和尺寸 Centre drills Part 1: Centre drills for centre holes without protecting chamfers-Type A Dimensions 

中心钻 第2部分: 带护锥的中心钻-B型 型式和尺寸 Centre drills Part 2: Centre drills for centre holes with protecting chamfers--Type B Dimensions 

中心钻 第3部分: 弧形中心钻-R型 型式和尺寸 Centre drills Part 3: Centre drills for centre holes with radius form--Type R Dimensions 

中心钻 第4部分: 技术条件 Center drills Part 4: Technical specifications 

机用锯条 第1部分: 型式与尺寸 Machine hacksaw blades Part 1: Dimensions 

机用锯条 第2部分: 技术条件 Machine hacksaw blades Part 2: Technical specifications 

直齿插齿刀 基本型式和尺寸 The basic types and dimensions for spur shaper cutters 

[2006年 6月24日 17 : 59]      评论:[0] | 浏览:[8220]
  日 历 calendar
« 3月 2024 »
        1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
               
  全 站 搜 索

  博 客 介 绍 
    在绝境中寻找希望,人生终将辉煌!!! В сложной ситуации и самом отчаянном положении всегда есть надежда на лучшее, жизнь в конце концов будет блестящей. 26年以上俄语学用经验,5年以上的俄罗斯经历,1000万字以上全专业领域翻译经验,专业、高效、雅致,超值服务,业内***。 高级审译 Алёша 林鼎盛 QQ(微信号):22079138 linhaitian777@126(dot)com SKYPE:linhaitian777, 疯狂俄语鲁芳的群:http://www(dot)yuncat(dot)net。林鼎盛抗癌公益群103532643 新浪微博:宋峰工贸林鼎盛 http://weibo(dot)com/u/1459644124,#林鼎盛有约# ,#好言重译重塑#,国际广播天台《林鼎盛有约》专栏 博卓翻译有限公司,新疆宋峰工贸,林鼎盛中药皂 独联体信息港博客圈致力于启蒙俄语人才、启示俄语工作者、启发创新合作模式、启动战略联合! 俄语圈倡导帮扶互助、团结友爱、重诚信信诺、自强不息。 CCTV-7,致富经。
  文 章 分 类 
· 俄语翻译招聘 信息发布平台 [262]
· 俄语分类词汇 [228]
· 医疗保健 [8]
· 圣经中俄文对照 [7]
· 俄文歌曲,电影,收音机所有音频或 [15]
· 俄语学习 [36]
· 俄罗斯独联体商情发布 [27]
· 中俄对照作品 [97]
· 俄罗斯白俄罗斯乌克兰独联体留言板 [17]
· 俄语学习问答 [11]
· 项目合作对俄白乌独联体 [63]
· 原创作品 [42]
· 中国 [40]
· 俄文中国导游词 [6]
· 独联体综合信息 [417]
· 俄语语法 [55]
· 友情发布平台-中俄合作翻译中心 [9]
· 中国国际展会会展信息发布平台 [2]
· 独联体留学旅游信息港 [6]
· 俄罗斯国立医科大学 [9]
· 小语种 [6]
· 跨国管理 [4]
· 独联体资料库 [51]
· 俄白乌独联体法律-法规-政策-规划- [190]
· 外贸知识理念 [66]
· 中英词汇及对照 [458]
  最 新 发 表 
    打破体制束缚,创造新机制,变堵为疏,促进复杂事情迎刃而解
    Весенняя гроза 春雷
    В лесу родилась ёлочка 森林中有棵小枞树
    翻译技术行业,译员的态度决定一切
    从对俄塑料机械技术翻译说起谈中国的强企之路
    简论笔译与口译的阴阳之道
    对整个俄语圈的倡议
    转基因时代,西方走错了路,中国将引领一条新路
    Не говори мне ничего 什么都不要对我说
    转基因时代,西方走错了路,中国将引领一条新路
    翻译技术行业,译员的态度决定一切
    莫言获诺贝尔奖 Нобелевская премия присуж
    Технологическая инновация Антай
    Пекинская больница Антай
    凉州词 Лянчжоу цы
    Огнеупоры для цементной печи компа
    诚信拯救世界
    俄罗斯开放投资 诚邀天下投资者
    无缘诺贝尔奖,中国也当为俄罗斯总统的批评内疚与自责
    今日俄罗斯
    论语 Лунь Юй(古文-白话文-俄文对照-1-5)特此纪念孔子生日
    历史可要短得多История была намного короч
    俄罗斯公司招聘俄语翻译
    中国战略强于美国战略
    世界上使用***广泛的10种语言
    俄语在前苏联各国地位不同 仍有近3亿人视作母语
    
    上市(HK、内地)矿业公司子公司招聘境外项目(投资13亿RMB,运营14-
    美容方面的中俄词汇3
    林鼎盛原创笑话汉译俄- 偷酒
    俄罗斯口岸大汇集
    俄罗斯产地煤炭名称中俄文对照
    俄语口语380句转载
    俄语流行口语极短句888个--6字句-7字句
    俄语流行口语极短句888个--2至5字句
    中国东北:重走振兴之路 中俄对照
    俄罗斯建筑规范与标准翻译、俄罗斯建筑规范翻译、俄罗斯建筑标准翻译
    公司名缩写 俄文
    ***解读中俄联手治理灰色清关
    对俄罗斯工程建筑行业***新法规的看法及建议
    俄农药市场前景广阔
    俄罗斯80%的药品依赖进口
    俄罗斯新闻社提供新闻推广及广告代理服务
    寻购无纺布设备
    俄罗斯销售煤
    俄制药企业寻求合作伙伴
    Медико-Производственная Компания《
    销售铝土矿
    寻购聚醚纤维
    寻找矿产项目合作伙伴
  文 章 归 档 
  最新回复(已关闭) 
  我的连 接(已关闭) 
  博 客 统 计 
·
文章总数:2135
·
评论总数:2458
·
访问总数:6832992
   管理入口